Recharging - Samsung SR8824 Benutzerhandbuch

Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER

RECHARGING

You can have the robotic vacuum cleaner return
to the charger to charge the battery by using the
Recharging button.
When the robotic vacuum cleaner is operating, press
■
the ( ) button to cancel the operation and press the
Recharging button.
1. Press the Recharging button.
- The main unit icon (
vacuum cleaner will return to the charger.
2. To stop the robotic vacuum cleaner while it is
returning to the charger, press the (
3. To test the auto charge function, press the
Recharging button when the robotic vacuum cleaner
is less than 1.5 m from the charger.
Troubleshooting when the robotic vacuum cleaner does not return to the
charger
●
Check the installation of the charger
- When the charger is in a location where the
charger cannot guide the robotic vacuum cleaner
to the charger.
- When the charger is more than 5m away from
robotic vacuum cleaner.
: It may require a longer time for the robotic
vacuum cleaner to return to the charger.
●
Manually charge the robotic vacuum cleaner in the following cases.
- When the charger is installed in a corner.
- When the battery is fully discharged.
- When the robotic vacuum cleaner is trapped by an obstacle (furniture etc.)
- When the robotic vacuum cleaner cannot pass over the doorsill to the location
where the charger is installed.
24_ Operating the cleaner
) is turned on and the robotic
) button.
Using the main unit
buttons