Bluetooth - Samsung HW-J470 Bedienungsanleitung

BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires!
+ To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
1.● Press the ( ) button on the main unit's top panel
or the (SOURCE) button on the remote control
to select the BT mode.
• You will see BT READY on the front display
of the Soundbar.
2.● Select the Bluetooth menu on the Bluetooth device
you want to connect. (Refer to the Bluetooth device's
user manual.)
3.● Select the Stereo headset menu on the Bluetooth
device.
• You will see a list of scanned devices.
4.● Select "[Samsung] Soundbar J-Series" from the
list.
• When the Soundbar is connected to the
Bluetooth device, it will display [Bluetooth
device name]  BT on the front display.
• The device name can only be displayed in
English.An underline " _ " will be displayed if the
name is not in English.
• If the Bluetooth device has failed to pair with
the Soundbar, delete the previous "[Samsung]
Soundbar J-Series" found by the Bluetooth
device and have it search for the Soundbar
again.
5.● Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the Soundbar.
In BT mode, the Play/Pause/Next/Prev functions
are not available. However, these functions are
available in Bluetooth devices supporting
AVRCP.
● ● If asked for PIN code when connecting a
Bluetooth device, enter <0000>.
● ● Only one Bluetooth device can be paired at a
time.
● ● The Bluetooth connection will be terminated
when you turn the Soundbar off.
● ● The Soundbar may not perform Bluetooth
search or connection correctly under the
following circumstances:
● - If there is a strong electrical field around
the Soundbar.
● - If several Bluetooth devices are
simultaneously paired with the Soundbar.
● - If the Bluetooth device is turned off, not in
place, or malfunctions.
● ● Note that such devices as microwave ovens,
wireless LAN adaptors, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, which can cause
electric interference.
● ● The Soundbar supports SBC data (44.1kHz,
48kHz).
● ● Connect only to a Bluetooth device that
supports the A2DP (AV) function.
● ● You cannot connect the Soundbar to a
Bluetooth device that supports only the HF
(Hands Free) function.
● ● Once the HW-J470 has been paired with a
device, if the Soundbar is in D.IN, AUX, HDMI
or USB mode and you select "[Samsung]
Soundbar J-Series" from your Bluetooth
device's list, the HW-J470 will automatically
change to BT mode.
19
CONNECTIONS
Connect
Bluetooth device