Connections; Connecting The Subwoofer And Swa- 7000S To The Main Unit - Samsung HW-J470 Bedienungsanleitung

CONNECTIONS

CONNECTIONS
CONNECTIONS
● ● Do not connect the power cord of this product or your TV to a wall outlet until all connections between
components are complete.
● ● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
CONNECTING THE SUBWOOFER AND SWA-
7000S TO THE MAIN UNIT
CONNECTING THE SUBWOOFER AND SWA-7000S AUTOMATICALLY
The linking IDs of the SWA-7000S wireless module and the subwoofer are preset at the factory. The subwoofer and
the SWA-7000S should link (connect wirelessly) to the main unit automatically when you turn on the main unit, the
subwoofer, and the SWA-7000s.
• When the subwoofer and SWA-7000S are completely connected, the blue LED Link indicators on the subwoofer
and the SWA-7000S stop blinking.
CONNECTING SUBWOOFER AND SWA-7000S MANUALLY
If the blue LED lights do not stop blinking when the main unit, subwoofer, and SWA-7000S are turned on, please reset
the linking ID by following the procedure below.
1.● Plug the power cords of the main unit, subwoofer, and SWA-7000S into an AC wall outlet.
2.● Press the ID SET button on the back of the subwoofer and the SWA-7000S with a small, pointed object for 5
seconds.
• The STANDBY indicator turns off and the LINK indicator (Blue LED) blinks quickly.
3.● While the main unit is powered off (in STANDBY mode), press and hold the
seconds.
4.● The ID SET message appears on the Soundbar's display.
5.● To finalize the link, turn the main unit's power on while the blue LEDs on the subwoofer and the SWA-7000S are
blinking.
• The main unit, subwoofer, and SWA-7000S should now be linked (connected).
• The Link indicators (Blue LEDs) on the subwoofer and SWA-7000S should be glowing continuously. They
should not be blinking.
• If the Link Indicators are not solid blue, the linking process has failed. Turn off the main unit and start
again from Step 2.
(Mute) on the remote control for 5
14
L R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
ID SET