Packing List; Installation - Swim & Fun Easy Salt 50/80 m2 Handbuch

UK
• This device is intended for use in family pools only – both in-ground and free-standing.
• NON OBSERVANCE OF THESE INSTRUCTIONS MAY CAUSE DAMAGE TO THE DEVICE
OR SERIOUS INJURY
The safety instructions detailed in this manual are not exhaustive. They highlight the
most common risks of using electrical equipments in the presence of water. Any instal-
lation and use of this equipment should be carried out with caution and common sense.
2.

PACKING LIST

3.

INSTALLATION

Important
Before proceeding with the installation of the device, it is very important to check the
following points:
Ensure that any hydraulic equipment is in good working order and is correctly sized. In
particular, check the flow of the filtration pump, the capacity of the filter and the diame-
ter of the waterworks.
The maximum pressure of the water in the cell must not exceed 3 bars.
The device's treatment capacity should be adapted to the volume of water to be treated
and to the climate of installation. In case of warm climate, a device designed to treat a
volume of 30 m
m , a device designed to treat a volume of 50 m
3
a family swimming pool of 40 m
erate climate must be limited to a family swimming pool of 50 m
MV-1812-1813-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
A)
B)
C)
D)
A)
in moderate climate must be limited to a family swimming pool of 20
3
, a device designed to treat a volume of 70 m
3
EasySalt electronic unit
1 chlorinator cell
Fitting kit
2 hose connectors
B)
in moderate climate must be limited to
3
C) D)
in mod-
3
.
3
53