IKA color squid Betriebsanleitung Seite 11

• Follow the safety instructions,
occupational health and safety and accident
prevention regulations.
• Attention – Magnetism! Effects of the magnetic
field have to be taken into account (e.g. data
storage media, cardiac pacemakers ...).
• The device must only be operated with the original
power supply unit.
/// Device design
• Do not use the device in explosive atmospheres, it
is not EX-protected.
• With substances capable of forming an explosive
mixture, appropriate safety measures must be
applied, e.g. working under a fume hood.
• To avoid body injury and property damage, observe
the relevant safety and accident prevention
measures when processing hazardous materials.
• Device surface is partially made of glass:
- Glass surface can be damaged by impact.
- If glass surface is damaged it could cause injury,
don`t use the device anymore.
• Set up the device in a spacious area on an even,
stable, clean, non-slip, dry and fireproof surface.
• The feet of the device must be clean and
undamaged.
guidelines, • Check the device and accessories for damage
before each use. Do not use damaged components.
/// Permissible medium / contaminants / side reactions
• Only process media that will not react dangerously
to the extra energy produced through processing.
This also applies to any extra energy produced in
other ways, e.g. through light irradiation.
• Beware of hazards due to:
- flammable materials,
- combustible media with a low boiling
temperature,
- glass breakage,
- incorrect container size,
- overfilling of media,
- unsafe condition of container.
• Process pathogenic materials only in closed vessels
under a suitable fume hood.
• The plate can heat up due to the action of the
magnets at high motor speeds.
• Please consider any possible contaminations and
unwanted chemical reactions.
• It may be possible for wear debris from rotating
accessory parts to reach the material being
processed.
11