Specified Conditions Of Use - Milwaukee M18 BTP Originalbetriebsanleitung

3
2
1
1 Outlet
2 Direction of flow indicator
3 Handle
4 Battery compartment
button
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
• Not for potable water or other potable liquids.
• Always remove battery pack from the pump before making
any adjustments, changing accesories, or storing appliance.
Such preventive safety measures reduce the risk of starting the
appliance accidentally.
• Keep handles and grasping surfaces dry, clean and free from oil
and grease. Slippery handles and grasping surface do not allow
for safe handling and control of the tool in unexpected situations.
• Keep bystanders, children, and visitors away while operating
pump. Distractions will result in mistakes.
• Stay alert, watch what you are doing and use common sense
when operating this pump. Do not attempt to operate this pump
while your are tired or under the influence of drugs, alcohol
or medication. A moment of inattention may result in serious
personal injury.
• Use safety equipment. Always wear eye protection. Dust mask,
non-skid safety shoes and hard hat must be used for appropiate
conditions.
• Do not let familiarity gained from frequent use of tools allow you
to become complacent and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a second.
• Do not pump water from a creek, pond, or source where foreign
objects may be sucked into the pump. Solids may enter the inlet
hose.
• Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
• Indoor use only.
• Use hoses with 19 mm (3/4") BSPT brass female fitting.
• A heavy duty hose should be used for the inlet hose to prevent
the hose from collapsing. For best results, use a short length,
large diameter hose, such as a 183 cm (6') long, 19 mm (3/4")
inner diameter garden hose. Longer or thinner hoses may reduce
performance and flow rate.
• A regular garden hose may be used as an outlet hose.
Deutsch
4
5
6
7
5 Battery compartment
6 On/Off button
7 Inlet

SPECIFIED CONDITIONS OF USE

This pump is designed for applications such as emptying water
heaters, tanks, etc. The pump is not waterproof or weatherproof
and is not intended to be used outdoors or inside showers, saunas
or other potentially wet locations.
This pump has been evaluated for use with clear water only. It is
not designated to handle salt water, brine, laundry discharge, or
any other application which may contain caustic chemicals and/or
foreign material. This pump is not suitable for use with aquatic life.
Do not use this product in any other way as stated for normal use.
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully char-
ged, after use. Battery packs which have not been used for some
time should be recharged before use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery
pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition, Every six
months of storage, charge the pack as normal.
Do not dispose of used battery packs in the household refuse or
by burning them. Milwaukee Distributors offer to retrieve old
batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System M18 chargers for charging System M18 battery
packs. Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
BATTERY PACK PROTECTION
In extremely high torque, binding, stalling and short circuit
situations that cause high current draw, the tool will stop for about
2 seconds and then the tool will turn OFF.
To reset, release the trigger.
Under extreme circumstances, the internal temperatur of the
battery could become to high. If this happens, the battery will shut
down.
Place the battery on the charger to charge and reset it.
GB
English
11