Tunturi Pure COMPACT SMITH Betriebsanleitung Seite 7

Folding Bench
1. Pull out the U-shaped Lock Pin (#28) and then drop the Pin into the hole on Leg
Developer to lock the Leg Developer (#7) in position.
2. Loosen and pull out Lock Knob (#51) to slide the Backrest Board to lowest position.
3. Pull down the Lock Rod Handle (#24) to move the Lock Rod out of the lock hole;
raise and fold up the Main Seat Support (#2). Release the Lock Rod Handle and
bounce Lock Rod back to the lock hole to lock the Main Seat Support in vertical
position.
4. To un-fold bench, just pull down the Lock Rod Handle to move the Lock Rod out
the lock hole, and then pull down the Main Seat Support, release the Lock Rod
Handle to bounce the Lock Rod back to the lock hole.
6 Tunturi Pure Strength www.tunturi-fitness.com