Echogear EGLF3 Montageanleitung Seite 6

STEP 2 I nstall the Wall Plate
For 24
in. [504.8mm]
stud spacing:
For
WOOD STUD INSTALLATIONS,
CAUTION: Avoid potential personal
injuries and property damage!
Drywall covering the wall must not
exceed 5/8 in. (16 mm).
Minimum wood stud size:
nominal 2 x 4 in. (51 x 102 mm)
actual 1 ½ x 3 ½ in. (38 x 89 mm).
For
CONCRETE INSTALLATIONS,
CAUTION: Avoid potential personal
injuries and property damage!
Mount wall plate/arm
onto the concrete surface
(no surface covering).
6
Our Extender Kit is
required to complete
your install.
24 in.
(61 cm )
directly
06
Continue your install
using the instructions
that came with the
EGLF3-EXT Extender
Kit, then come back
when instructed.
follow STEP 2A on PAGE 7
Min. Wood Stud Depth:
nominal 4 in. (102 mm)
actual 3 ½ in. (89 mm)
Min. Wood Stud Width:
nominal 2 in. (51 mm)
actual 1 ½ in. (38 mm)
Min. Wood Stud Spacing:
16 in. (406 mm)
Max. 5/8 in. (16 mm)
follow STEP 2B on PAGE 8
Min.
8 in.
(203 mm)
SOLID WALL
(406 mm)
You can find
Extender Kit
EGLF3-EXT
at Echogear.com
or on Amazon.
BLOCK WALL
(203 mm)
Min. Min.
16 in. 8 in.
(203 mm)
Min.
8 in.