Installation And Commissioning; Installation Conditions - Spirotech SPIROVENT SUPERIOR S600 Anwenderhandbuch

5 INSTALLATION AND
COMMISSIONING
5.1

Installation conditions

Install the unit on a frost-free, well-ventilated place.
•
Install the unit in accordance with the local
•
guidelines and rules.
Connect the unit to a 230 V / 50 -60 Hz supply.
•
Install the unit as bypass on the main line of the
•
installation.
Preferably install the unit at the point in the
•
installation with the lowest temperature. Here the
most dissolved gases are found in the fluid.
In case of a heavily contaminated system fluid, a
•
dirt separator is to be installed in the main return
line of the installation.
Make sure that the expansion system has the
•
proper dimensions. The water displacement in the
unit can cause pressure variations in the
installation. Take into account an extra net
expansion volume of at least 8 litres. Make sure the
expansion system connection is properly sized (at
least ¾"/22mm diameter).
Make sure that the operating panel is always easily
•
accessible.
Make sure that you maintain at least the distance as
•
indicated for service and repair.
•
600
5.2 Unpack
WARNING
To prevent damage to the unit do not hoist
the unpacked unit.
The unit is delivered on a pallet.
8
1.
2.
600
3.
4.
English
Remove the straps.
Remove the packaging.
A B A
Remove the fasteners (A).
Remove the cover (B) from the unit.
User manual - 1.0