5.
Remove the fasteners. Keep them for future use.
6.
Remove the brackets. Keep them for future use.
7.
Move the unit to its location of installation. Lift the
unit with a hoist.
User manual - 1.0
5.3
5.3.1
1.
Place the unit on a flat surface, against a flat, closed
wall.
2.
It is possible to mount the unit to the floor. Use
2x
brackets and adequate fasteners (A).
3.
Under condensing circumstances: It is possible to
remove the plug from the drain hole (B). Use a 1"
adapter to connect the unit to a drain tube and a
proper waste water outlet.
5.3.2
Mechanical
A
B
1.
Make two branch lines ¾" (A) on the side of the
main transport line.
English
Mounting and installation
Mounting
A
A
Installation
>
500mm
NOTE
The distance between them should be at
least 500 mm. The inlet of the unit should
be connected to the first connection point in
the flow direction.
B
A
A
B
9