Tesla 3 Gebrauchsanleitung Seite 5

7
8
9
05
Keeping the clip tool in place, insert a clip
(12) at the arrow location.
Remove the clip tool (1), being sure the
clip (12) is engaged in the metal receiver
under the glass. Pull up and wiggle to be
sure it's properly engaged. Be sure the
center of hook aligns with the arrow
Repeat steps 4 to 6 to install a clip (12)
on the other three corners of the car.
Place the front driver side pad (6) over the
clip on the front driver side. Use the icon
to help identify and install the correct pad
(6-9) in the proper location.
Repeat to install the remaining pads (7-9)
at the other three corners of the car.