Safety Devices - BASF nyloflex Combi FIII Bedienungsanweisung

- Countdowns on DISPLAY. The word END appears when the time set is finished and
it disappears when closing the lid.
- Interruption of the countdown and of the lamps function when opening the drawer.
Closing it, everything starts again.
- A numerical key allows to read the working hours of the lamps on the display and
to reset after the lamps replacement.
- Dryer thermically isolated.
- 8 tangential fans, with a 500W electrical resistance each, provide for warm air
circulation in the dryer.
- 4 plate-holding drawers.
- Fumes exhausting flow control in the rear of the machine
- Temperature adjusted at a max. of 65°C. Constant visualization on displays.
- Four timers (one/each drawer) from 1 to 999 min. Each timer has its own display
showing the countdown. The word "END" appears at the end of the time set.
1.1 The lamps are automatically switched off and the count-down is stopped if the
exposure drawer is opened while working, this to prevent from damaging the plate.
Everything starts again when the drawer is closed.
1.2 Safety devices as per 1.1 are also provided for the post-exposure drawer.
1.3 All electrically supplied parts are singularly protected.
1.4 An air flow sensor interrupts the resistances if there is no fumes exhausting.
DRYER

SAFETY DEVICES

5