Taurus STRIKER MINI Handbuch Seite 15

ANOMALIES AND REPAIR
PROBLEM
1 The low battery indicator lamp
is lit.
2 The appliance has not started.
3 The battery charged indicator
continues to pulse after 48
hours of charging.
4 The side brushes are defor-
med.
5 The appliance does not start
functioning.
6 The appliance goes in circles
and never in a straight line.
7 The autonomy is lower than
normal.
8 The appliance moves bac-
kwards after switching it on
In case of breakdown call the customer service
telephone number indicated in the guarantee
sheet. Do not attempt to disassemble or repair
the appliance yourself as this may be dangerous.
- If the connection to the mains has been dama-
ged, it must be replaced and you should proce-
ed as you would in the case of damage.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public containers for each type of material.
PROBABLE CAUSE
1. The battery is low.
2. The appliance has been
lifted from the floor.
1. The on/off button is in the
"0" position.
2. The dust box filter is badly
fitted.
During the charging process,
the current has been cut off,
so the appliance has not been
charged properly.
They are deformed due to
use.
1. The battery is incorrectly
fitted.
2. The battery charge level is
too low.
There may be problems with
the wheels.
The battery has not comple-
tely recovered / charged.
The appliance is on a colou-
red surface (low reflection of
the light against the surface)
- The product does not contain concentrations of
substances that could be considered harmful to
the environment
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of
waste electrical and electronic equipment
(WEEE)
This symbol means that the product may
include a battery or batteries; the user
must remove them before disposing of
the product. Remember that batteries
must be disposed of in duly authorised contai-
ners. Do not dispose of them in fire.
SOLUTION
1. Recharge the battery.
1. Operate the robot's on/off
button.
2. Fit the dust box filter
correctly.
Repeat the charging process.
Remove the side brushes
and soak them in hot water to
recover their initial shape.
1. Fit the battery correctly.
2. Charge the batteries of the
appliance.
Contact our customer service
department to repair them.
1. Repeat the charging
process.
2. This can be normal during
the first times of use.
3. Change the battery for a
new one.
Adjust the height sensors to
Position 2 or 3 (Fig.10)