Nortel Networks Business Policy Switch 2000 Installationsanweisungen Seite 23

Business Policy Switch Main Menu
IP Configuration/Setup...
SNMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Identify Unit Numbers...
Renumber Stack Units...
Display Hardware Units...
Spanning Tree Configuration...
TELNET Configuration...
Software Download...
Configuration File...
Display Event Log
Reset
Reset to Default Settings
Logout
Use arrow keys to highlight option, press <Return> or <Enter> to
select option. Press Ctrl-R to return to previous menu. Press Ctrl-C
to return to Main Menu.
5
Select IP Configuration/Setup (or press i) to display the IP Configuration/Setup menu.
Note: The default management VLAN in the Business Policy Switch is VLAN 1. To
manage the switch, make sure the network management station is on the management
VLAN or is connected to the management VLAN through routers.
In-Band Stack IP Address:
In-Band Switch IP Address: [xx.xx.xx.xxx]
In-Band Subnet Mask:
Default Gateway:
Use space bar to display choices, press <Return> or <Enter> to select
choice. Press Ctrl-R to return to previous menu.
return to Main Menu.
IP Configuration/Setup
BootP Request Mode: [ BootP Disabled ]
Configurable
------------------ -----------------
[xx.xx.xx.xxx] xx.xx.xx.xxx
[255.255.255.0] 255.255.255.0
0.0.0.0 0.0.0.0
Press Ctrl-C to
In Use Last Boot
---------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Business Policy Switch 2000
23