Nortel Networks Business Policy Switch 2000 Installationsanweisungen Seite 19

Connect the power cord to the back of the switch, and then connect the cord to a power outlet.
The Business Policy Switch does not have a power switch. When you connect the AC power cord
to a suitable AC power outlet, the switch powers up immediately.
Warning: Disconnecting the power cord is the only way to turn off power to this device.
Always connect the power cord in a location that can be reached quickly and safely in
case of an emergency.
AC Power specifications
Input current:
Input voltage (rms):
Power consumption:
Thermal rating:
9853EA
1 to 0.5 A
100 to 240 VAC at 47 to 63 Hz
70 W
240 BTU/hr maximum
Business Policy Switch 2000
19