Oki PT390 Bedienungsanleitung Seite 88

(2) CUSTOMIZE VALUE setup items
No. Item
1 USER NV
MEMORY
2 NV GRAPHIC
MEMORY
3 PAPER WIDTH
4 PRINT COLOR
5 PRINT DENSITY
6 BK DENSITY
(2COLOR)
7 MAX SPEED
8 LOW POWER
9 BUZZER
INTERVAL
10 BUZZER
REPETITION
Explanation
- Capacity of the user NV
memory.
- Capacity of the NV graphic
memory.
- Paper width and number of
columns used.
- Print colors.
- Print density.
* 70% is the lowest density.
130% is the highest density.
- Black density when "TWO"
is set for PRINT COLOR.
* 70% is the lowest density.
130% is the highest density.
- Maximum print speed.
* 1(100mm/s) is the lowest
print speed and 11(300mm/s)
is the highest print speed.
- Setting for reducing power
consumption.
MODE1:Reduction of about
10%
MODE2:Reduction of about
30%
-Set a buzzer tone in the print
Pushed down FEED switch in
a cover opening state and
receive a buzzer command,
(ESC p 03h t1 t2 t3)the buzzer
in the print sounds
-A buzzer sets the number of
times to sound in print.
Pushed down FEED switch in
a cover opening state and
receive a buzzer command,
(ESC p 03h t1 t2 t3)the
buzzer in the print sounds
86
Detail setup item
1KBYTE 64KBYTE,
128KBYTE 192KBYTE
None
64KBYTE 128KBYTE
192KBYTE 256KBYTE
320KBYTE 384KBYTE
83mm/53 columns
80mm/48 columns
80mm/42 columns
60mm/36 columns
58mm/35 columns
58mm/32 columns
MONO
TWO
70% 75% 80%
90% 95% 100%
110% 115% 120%
130%
70% 75% 80%
90% 95% 100%
110% 115% 120%
130%
1 2 3
6 7 8
11
NORMAL
MODE1
MODE2
PATTERN 1
PATTERN 2
PATTERN 3
PATTERN 4
PATTERN 5
ZERO
ONE
TWO
THREE
FOUR
FIVE
85%
105%
125%
85%
105%
125%
4 5
9 10