Herunterladen Inhalt Inhalt Diese Seite drucken

Stiga MCS 504 PRO Handle Serie Gebrauchsanweisung Seite 63

Vorschau ausblenden Andere Handbücher für MCS 504 PRO Handle Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 44
      D o  not  connect  the  battery  charger  directly  to  the  en-
gine  terminal.  It  is  not  possible  to  ignite  the  engine  us-
ing the battery charger as a power source, as it may get 
damaged. 
      I f you do not use the lawnmower for a long period of time, 
disconnect  the  battery  from  the  engine  wiring,  making 
sure the charge level is good.
• Electric push-button ignition models
      F ollow  all  the  instructions  provided  in  the  engine 
Instruction Manual.
4.5 Cleaning the interior (where applicable)
To clean the internal parts of the lawnmower:
–    c onnect a water hose to its pipe fitting (1);
–    l ower the cutting height as far as possible;
–    a lways stand behind the lawnmower handle;
– start the engine.
4.6 Adjusting the converter cable (if fitted)
This adjustment is necessary when the lever (1) tends not 
to remain in the «
» position.
With the lever (1) in the «
ster (2) in the direction indicated by the arrow as needed to 
ensure the lever remains in position.
IMPORTANT The adjustment must be made when the
engine is off.
5. DIAGNOSTICS
What to do if ....
Problem description
1. The petrol-driven lawnmower doesn't work
No oil or fuel in the engine
The spark plug and filter 
are not in good condition
The lawnmower's fuel tank 
was not emptied at the end 
of the previous season
2. Mowing is difficult
The cutting means is not in 
good condition
3. The machine starts to vibrate abnormally
Damaged or loose parts
For any doubts or problems, please do not hesitate to con-
tact your nearest Customer Service Centre or Your Dealer.
» position, turn the cable adju-
Corrective Action
Check the oil and petrol 
levels
Clean the spark plug and 
filter which may be dirty or 
replace them
The float may be blocked; 
tilt the lawnmower on the 
carburettor side
Have the cutting means 
sharpened or replace it
Stop the machine and 
disconnect the spark plug 
cable
Inspect for damage
Check for and tighten any 
loose parts
Have all checks, repair 
work and replacements 
carried out by a specialized 
Centre only.
EN - 6

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mc 534 serieMcs 504 pro handle serie

Inhaltsverzeichnis