Makita HG5030 Gebrauchsanleitung Seite 6

MOUNTING THE CORRECT ACCESSORY (IF APPLICABLE)
Icon Description
Glass protection nozzle
Reflector nozzle
Reduction nozzle
Wide-slot nozzle
Scraper
Make sure that the tool is switched off and the nozzle has cooled down.
Q
Falling down nozzle may ignite objects on the floor. Nozzles must be mounted firmly and
Q
secure on the unit.
Touching a hot nozzle can lead to serious burn.Before attaching or replacing a nozzle,
Q
allow the unit to cool down completely or use a suitable tool.
A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-proof surfaces.
Q
An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use
Q
only original nozzles according to the table that are suitable for your unit.
INSTRUCTIONS FOR USE
Always observe the safety instructions and appli-
Q
cable regulations.
Use only one hand to hold the tool, do not place
Q
your other hand over the air vents.
Prior to operation
Mount the correct accessory for the application.
Q
Set the desired air temperature.
Q
Switching on and off
To switch the tool on, set the on/off switch to
Q
position 1/2/3. Some smoke may be emitted after
switching on, this does not indicate a problem.
To switch the tool off, adjust the lowest temper-
Q
ature to cool off, then set the on/off switch to
position 0. Let the tool cool down before moving
or storing it.
Temperature setting
Turn ON/OFF switch to 1/2/3, depending on tem-
Q
perature you need.
Purpose
Protection windows when stripping frames
Soldering pipes
Welding, sleeve shrinking (heat concentrated over small area )
Drying, thawing (heat spread over wider area )
Stripping paint and varnish
Detachable front cover
The front cover can be removed when working at
Q
a narrow area.
Be careful of the hot nozzle.
Removing the front cover increases the
risk of burn with the bare hot nozzle.
Stripping paint
Mount an appropriate accessory.
Q
Set a high air temperature.
Q
Switch the tool on.
Q
Direct the hot air onto the paint to be removed.
Q
When the paint softens, scrape the paint away
Q
using a hand scraper.
6 English