Ec Declaration Of Conformity; Other Information; Technical Specifications - Klein + Hummel CMS 62 T Montageanleitung

EC Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of
Directives 2004/ 108/ EG and 2006/ 95/ EG. The declaration is available on the internet site at www.klein-
hummel.com. Before putting the device into operation, please observe any respective country-specific
regulations.

Other Information

Recycling
Attention to product quality in the design phase ensures, firstly, that products have a long life and that,
secondly, all parts of a product may be reused or recycled at the end of that life. An extensive product
servicing network ensures that products can be repaired in the event of the premature failure of a part, or
as a way to prolong the life of a product that would otherwise be considered a candidate for landfill.
Eventually there comes a time when a product is considered beyond repair (for economic reasons or lack of
parts), so the parts must be disposed of in a suitable manner. The disposal should conform to local
environmental regulations and be conducted in an authorized recycling facility. This product consists of
some or all of these components:
Item
Loudspeaker
Packing Material
User Manuals and Sales Literature

Technical Specifications

CMS 62 T
TECHNICAL DATA
Driver Sizes and Types
Frequency Response (+/- 3 dB)
Frequency Response (-10 dB)
Sensitivity of loudspeaker system with passive crossover
(halfspace)
Coverage Pattern, nominal
Directivity factor (Q)
Directivity index (DI)
Passive Crossover point, slope and type
Impedance of passive crossover
Maximum SPL:
Power Handling:
Cabinet Material
Cabinet Finish
Weight
Depth
Baffle cut-out
Depth
Connectors
Material
Steel, Plastic, Copper,
electronic devices
Cardboard, wood and/or
plastics
Paper and cardboard
6.5" LF + 1" HF
85 Hz to 19 kHz
65 Hz to 22 kHz
89 dB/1W/1m
110 degrees conical
avg. 125 Hz - 16 kHz / avg. 800 Hz - 16 kHz
- 6.0 / 8.2
avg. 125 Hz - 16 kHz / avg. 800 Hz - 16 kHz
7.8 dB / 9.1 dB
LF/HF: 3500Hz - 2.order
16 ohms nominal
110dB SPL, Peak: 113dB SPL
60 watts rms, 120 watts program, 240
watts peak (10ms)
metal backside can
white
3.5 kg (7.7 lbs)
320 mm / 12.6 "
285 mm /11.22"
200 mm / 7.89"
4-Pin Phoenix connector
Recycling Instructions
Recycling only in authorized
recycling plants
Separate materials then recycle
Recycle
14