WOLFF FRÄSMASTER Originalbetriebsanleitung Seite 12

EN
the addition of accessories and other
technical changes.
 All work done on your Wolff machine must be carried
out exclusively by a specialist workshop which
has suitably trained and experienced staff and the
working materials required. For this, we recommend
an authorised Wolff service shop.
 In the event that parts are deliberately replaced, acces-
sories are deliberately added or other technical
changes are deliberately carried out, the customer
must always consult an authorised Wolff service
shop or us, the manufacturer, before starting the
work.
 We urgently recommend only using safety-checked
original Wolff spare parts and original Wolff
accessories which have been cleared by us, the manu-
facturer. These spare parts and accessories can be
purchased from your authorised Wolff service shop,
which will also be pleased to assemble them for you
properly.
Original Wolff spare parts and Wolff accessories have
been specially tested for their safety and suitability for
Wolff machines.
We can not sufficiently judge the safety and suita-
bility of spare parts and accessories which are
not original Wolff parts, and are thus unable to
vouch for them.
 To maintain operating reliability and avoid damage, in
the case of technical changes – of whatever kind
– our technical guidelines are to be observed in
every case. Please also contact us at any other time if
you have any questions about your Wolff machine.
We can not assume any liability for damages caused
as a result of improper work and/or violation of the
above terms and conditions.
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff-tools.de
12