Power Adjustment
Hold PTT button and simultaneously press [ ▲ ] to expand to high power
or press [ ▼ ] to switch to low power
Tone Call Selection
Hold 〝 PTT 〞 and press 〝 SET 〞 button once together to sent out the
tone call to other units.
Scan Channel
.
Press 〝 CH 〞 button, when channel icon blinks, hold [ ▲ ] or [ ▼ ]
around 2 secs to perform the channel scanning.
.
When performing the auto scanning, jumping of channel numbers
increasingly or decreasingly indicates scan in progress.
.
Scan stops when it detects a busy channel. Temporarily press any
〝 PTT 〞 , 〝 CH 〞 or 〝 Set 〞 button will disable scan and select the final
busy cannel.
.
The radio will only scan the channels in the list.
Note: To perform the scan function, please turn off the CTCSS code in
advance.
.
7