IN ORDER NOT TO INFRINGE THE I.S. CERTIFICATION OF THIS
PRODUCT, THE FOLLOWING MUST BE OBSERVED:
1.
Battery type Duracell MN1604 must only be used.
2.
Battery replacement must only take place in a non-
hazardous area.
3.
Battery connector must only be replaced with the
specifi ed Comark type.
4.
No modifi cations or repairs to be carried out except
by an authorised Comark Service Representative.
C9006IS is a C9006X Series Instrument.
A full description of the operation of the modes of the C9006IS is given
below. Please read it carefully and if you have any further queries
contact our Sales Desk.
HOW TO USE THE COMARK C9006IS THERMOMETER
Firmly press each button once. The display will show any changes you
have made.
ON/OFF
Press to turn ON. (Keep pressed if you want to see all the
display symbols).
Note: The instrument performs a self-test for up to 4 seconds
when switched on. Press this button again to turn the
instrument OFF.
WARNING
3