6.
You can now attach a broadband router to AM-100E's LAN port.
Please set the Router's WAN port to DHCP mode.
B.
For ISP with the following "Encapsulation". Please enter the correct
Encapsulation and VPI/VCI information in the manual setup page.
Then you will enter into the Setup - Bridge window
•
1483 Bridge and Classic IP over ATM
Please make sure Bridge mode option is Enabled.
•
1483 Routed
Please Disable the Bridge mode option
After finishing the EZ-setup, please make sure to refer to the 1483
Routed Additional Settings section to do.
•
Press the "Save" button and your router will reboot to the new
settings. Please wait for 30 seconds for the modem to reboot.
•
You can now attach a broadband router to the LAN port.
Wired Ethernet ADSL Modem
AM-100E
1483 Bridged IP LLC
1483 Bridged IP LLC
1483 Bridged IP VC-Mux
1483 Routed IP LLC
1483 Router IP VC-Mux
Classical IP over ATM
English
8
8