Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1483 Routed Additional Settings
If your ISP use 1483 Routed encapsulation. And you want to connect
broadband device to the AM-100E. Please follow the instructions in
this section. If your ISP uses other Encapsulation type, please ignore
this section.
1.
Please open your web browser to get into AM-100E's web
management page (Default IP: 192.168.1.254).
2.
On the left menu bar. Click on ADVANCE->Configuration ->
NAT and disable the NAT option. Press "Submit" to continue.
3.
On the left menu bar. Click on ADVANCE->Configuration -> LAN
• In the "Lan IP" field. Please enter the WAN Gateway IP
provided by your ISP.
• In the Subnet Mask field, please enter the WAN Subnet
mask provided by your ISP
• Please Disable the DHCP server
4.
Press "Submit" to make the changes.
If you want to connect broadband router to the AM-100E. Please set the
Broadband Router's WAN port IP address, gateway, and DNS to that
provided by your ISP.
Wired Ethernet ADSL Modem
AM-100E
English
1
1
0
0
Werbung
Inhaltsverzeichnis
