Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
For 1483 Bridge Users, please enter your ISP's Fixed IP
information to the router's WAN port.
For 1483 Routed Users, please go to "1483 Routed Additional
Settings" section.
After you have finished all settings on the AM-100E, please refer "Restore
TCP/IP Configuration" to restore your PC's IP settings
*note: if you do not have a broadband router and you connect your PC directly to
AM-100E. Then configure your PC's IP address according to IP given by your ISP
Setting Half Bridge
If your ISP use PPPoA encapsulation. And you want to connect
broadband device to the AM-100E. Then, you need to set your
AM-100E to Half Bridge mode. If your ISP uses other
Encapsulation type, please ignore this section.
1.
Please open your web browser to get into AM-100E's web
management page (Default IP: 192.168.1.254).
2.
On the left menu bar. Click on ADVANCE->Misc Configuration ->
PPP Half Bridge.
3.
Enable the "PPP Half Bridge" option
4.
Cllick on "Submit to make changes"
Wired Ethernet ADSL Modem
AM-100E
English
9
9
Werbung
Inhaltsverzeichnis
