Mechanical Tests - Siemens 7XV5810-0.A00 Handbuch

Technical Data

4.4 Mechanical Tests

4.4 Mechanical Tests
Vibration and Shock Stress in Stationary Use
Oscillation
– IEC 60255-21-1
– IEC 60068-2-6
Shock
– IEC 60255-21-2, Class 1
– IEC 60068-2-27
Seismic vibration
– IEC 60255-21-3, Class 2
– IEC 60068-3-3
Vibration and Shock Stress during Transport
Oscillation
– IEC 60255-21-1, Class 2
– IEC 60068-2-6
Shock (I)
– IEC 60255-21-2, Class 1
– IEC 60068-2-27
Shock (II)
– IEC 60255-21-2, Class 1
– IEC 60068-2-29
26
Sinusoidal
5 Hz to 150 Hz: ± 7.4 mm amplitude (< 8 Hz)
Acceleration: 20 m/s 2 ; 2 g; > 8 Hz
Frequency sweep rate: 3 octaves/min; 20 cycles in
3 orthogonal axes.
Semi-sinusoidal
Acceleration 5 g, duration 11 ms,
3 shocks each in both directions of the 3 axes
Sinusoidal
1 Hz to 8 Hz: + 8 mm amplitude (horiz. axis)
1 Hz to 8 Hz: + 4 mm amplitude (vert. axis)
8 Hz to 35 Hz: 2.0 g acceleration (horiz. axis)
8 Hz to 35 Hz: 1.0 g acceleration (vert. axis)
Frequency sweep rate: 1 octave/min; 1 cycle in
3 orthogonal axes
Sinusoidal
5 Hz to 8 Hz: ± 7.5 mm amplitude;
8 Hz to 150 Hz: 2.0 g acceleration
Frequency sweep rate: 1 octave /min, 20 cycles in
3 orthogonal axes.
Semi-sinusoidal
Acceleration 15 g, duration 11 ms,
3 shocks each in both directions of the 3 axes
Semi-sinusoidal
Acceleration 10 g, duration 16 ms,
1000 shocks each in both directions of the 3 axes
Accessories, Wide-Range Power Supply Unit 24 V/5 V, Manual
C53000-G9050-C602-1, Edition 09.2019