Power Craft 89040 Gebrauchsanweisung Seite 37

Refi lling the container
Figure 2
1. Place container on a piece of paper and
fi ll.
2. Check correct thinning.
Figure 3
3. Screw gun onto container.
Figure 4
Adjust spray with adjustment
knob
Figure 5
1. Before starting, turn adjustment knob
anticlockwise to maximum.
2. Press Start button and turn adjustment
knob backwards until best result is
achieved.
- Clockwise reduces pressure.
- Anticlockwise increases pressure.
DK
NO
SE
FI
GB
DE
PL
ET
37