Technical Data; Safety Instructions - Power Craft 89040 Gebrauchsanweisung

ELECTRIC SPRAY GUN
Instruction manual
Read the instruction manual
carefully before use, and keep it for
future reference.
Voltage/frequency
Indicates the required voltage and
frequency of the power supply to
which the machine is connected.
GB
Power rating
Indicates the machine's maximum
power.

Technical Data

Max output:
Max. adhesiveness:
Max. pressure:
Power source:
Power output.
Double insulation.
Volume capacity:
Pump cylinder
Pump cylinder Special steel. 5 min. diameter
Pump nozzle
Sound pressure max.
Use
Congratulations on the purchase of your
Powercraft spray gun.
Before use, please read this manually
carefully.
Keep the manual in a safe place for future
reference.
This apparatus requires careful cleaning and
maintenance for optimum function.
34
IMPORTANT: Always clean thoroughly after
use.
Failure to do so will aff ect performance and
invalidate the guarantee.

Safety instructions

NOTE: Do not point at other people or
animals.
Doing so entails a high risk of injury.
If paint or solvents come in contact with the
skin, seek medical help immediately and
advise the doctor of the type of paint or
solvents involved.
•
300 ml/min
•
80 DIN-s
•
160 bar.
230 volt ~50 Hz
•
120 Watt.
•
1,000 ml.
Special mixing
•
•
0.8 mm.
•
90 dB
•
For use with paint and solvents with a
fl ashpoint over 21º C. (32 °C in the UK)
only.
Indoor use: Ensure adequate ventilation.
Naked fl ames and smoking during use
are strictly forbidden.
Not a toy! Keep well away from children
and do not allow them to play with it.
Always disconnect from mains
electricity before performing any type
of cleaning or maintenance.
Never use for infl ammable liquids.
Never clean with infl ammable liquids.
Check carefully the content of
liquids used. (See manufacturer's
recommendations)
Never use liquids with properties you
are unsure of.