ASROCK P43 Pro/USB3 Handbuch Seite 20

2.7 2.7 2.7 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2.7 2.7 Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.8 2.8 2.8 Installing Windows Installing Windows Installing Windows
2.8 2.8 Installing Windows Installing Windows
Vista Vista Vista Vista Vista 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions
TM TM TM TM TM
If you want to install Windows
on your SATA / SATAII HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.8.1 2.8.1 2.8.1 2.8.1 2.8.1 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
Functions Functions
Functions Functions Functions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ function (IDE mode)
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
STEP 2: Install Windows
2.8.2 2.8.2 2.8.2 2.8.2 2.8.2 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista 64-bit Without RAID Functions 64-bit Without RAID Functions
Vista Vista Vista 64-bit Without RAID Functions 64-bit Without RAID Functions 64-bit Without RAID Functions
TM TM TM TM TM
If you want to install Windows
/ SATAII HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ function (IDE mode)
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
STEP 2: Install Windows
system.
2 0 2 0 2 0
2 0 2 0
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
® ® ® ® ® 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® ® ® ® ®
®
XP / XP 64-bit OS on your SATA / SATAII HDDs
Advanced screen
® XP / XP 64-bit OS on your system.
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
® ® ® ® ®
® TM
7 / 7 64-bit / Vista
Advanced screen
® TM
7 / 7 64-bit / Vista
ASRock P43 Pro/USB3 Motherboard
/ / / / /
TM TM
TM TM TM
TM
/ Vista 64-bit / XP / XP 64-bit OS
Storage Configuration.
/ / / / /
TM TM TM TM TM
TM
/ Vista 64-bit OS on your SATA
Storage Configuration.
TM
/ Vista 64-bit OS on your