Cleaning And Maintenance - Concept SV3050 Bedienungsanleitung

EN
Mounting the plates
1. Make sure the product is unplugged.
2. Select the plate you want to use.
3. Position the sandwich maker so that the controls are facing you. Open the sandwich maker by lifting the handle.
4. Insert the plate into the holes in the covers and push gently. It will snap into place. Repeat the procedure with the
second plate.
Removing the plates
1. Make sure the product is unplugged and completely cool.
2. Press the plate release button (7).
3. Pressing the button causes the plate to pop up slightly from the base. Lift the plate and slide it out of the tabs.
Repeat the procedure with the second plate.
4. Plates can be washed by hand or in a dishwasher

CLEANING AND MAINTENANCE

• Before cleaning, unplug the appliance and let it cool down.
• Wipe the inner parts and edges of grating using a paper towel or soft cloth. Wipe the sandwich maker surface only
using a slightly wet cloth and prevent water, grease or oil from entering the cooling openings.
• Do not clean the inner and outer parts using a rough sponge or pot scourer, as this might damage the parts.
48
SV3050