involight SlimPAR612 PRO Bedienungsanleitung Seite 22

AUTOMATIC CONTROL:
Press the "Menu" button repeatedly until the display shows
program. Press "Enter" again to select
now set the desired automatic program.
MUSIC CONTROL:
"Sound"
Press "Menu" until
"SO-1"
program
program
PROCEDURE OF THE PROGRAM:
Press the "Menu" button until
again to select the speed
desired speed of the program.
MICROPHONE SENSIVITY:
The sensitivity with which the headlamp reacts to the music signals (bass impulses).Press the "Menu" button until
"Sens".
the display shows
microphone sensitivity
desired microphone sensitivity. The height is the value, the more sensitive the microphone reacts to the music
signals (bass impulses) in the environment
SILENT-MODE:
The Silent mode refers to the music-controlled operation and is also known as Intelligent Sound Control. If the
silent mode is activated
impulses), the light beams of the device switch off (BLACKOUT). If the silent mode is deactivated
current program of the device will continue slowly, even if no further music signals (bass impulses) are received.
"SILE"
Press "Menu" until
Press "Enter" again to select "ON" or "OFF". With the "Up" and "Down" buttons you can now activate the silent
"ON"
mode or deactivate
IRC-CONTROLLING:
the "Menu"
Press key until the display shows
"Enter"
again to select
"ON"
remote control or deactivate
DMX-MODE:
To select the DMX mode and set the start address, press "Menu" button until the
Press "Enter" again to select
"d1" "d512".
to
MASTER/SLAVE-OPERATION:
The "SlimPAR612 PRO" can be linked to other devices. To set a device as a „Slave", press the „Menu" button until
„Slav"
the display shows
The interconnected devices are now working synchronously.
"AU-1"
is displayed. Sound mode is activated. Press "Enter" again to select sound
"SO-2".
to With the "Up" and "Down" buttons you can now set the desired sound
"SPED"
appears on the display. The flow rate menu is displayed. Press "Enter"
"SP-1" "SP-9"
to
The microphone sensitivity menu is displayed. Press "Enter" again to select the
"SE-1" "SE-9".
to
"ON"
and the microphone of the device does not receive any music signals (bass
is displayed. The menu for silent mode is displayed.
"OFF"
.
"ON" "OFF".
or
"OFF".
"4CH" "10CH"
or
With the "Up" and "Down" buttons, you can now set the desired start address.
. Confirm with the „Enter" key. Select the desired program on the master device.
"Auto".
"AU-2"
to . With the "Up" and "Down" buttons, you can
. With the "Up" and "Down" buttons you can now set the
With the "Up" and "Down" buttons, you can now set the
"INFR".
The IR remote control menu is displayed. Press
With the "Up" and "Down" buttons you can now activate the IR
mode. Press "Setup" again to select DMX start address
21
Now the unit plays the automatic
"OFF"
"ADDR"
display appears.
, the