Operating Modes And Setting Of The On-Board Menu - involight SlimPAR612 PRO Bedienungsanleitung

3.2 Operating modes and setting of the on-board menu:

MENU - To select the operating mode.
ENTER - Activates the setting process of a menu point or saves a setting.
UP - Increases the setting value.
DOWN - Decreases the setting value.
The SlimPAR612 PRO has several modes of operation, all of which can be set via the on-board menu (See Pic.1
Backside). Always press "Menu" repeatedly until the function to be set is reached. With "Enter" you reach the
individual, adjustable values. Then set the desired values with "Up" and "Down". These can be finally confirmed
with "Enter". Familiarize yourself with these settings to get more out of your device. You can set the following
modes and functions:
Mode
Au-1
Auto Au-2
Au-3
So-1
Sound So-2
So-3
Speed SP 1—SP9
Sensitivity Se 1—Se9
OFF
Silent scene
ON
ON
InFr
OFF
4CH
Addr
10CH
Slave Slav
Rot
Grün
Blau
Colours Mixing
Weiß
Amber
UV
C1
C2
C3
C4
C5
C6
C7
Colours-Macros C8
C9
C10
C11
C12
C13
C14
C15
Dimming dim 1—dim9
Menu Description
Automatic program 1
Automatic program 2
Automatic program 3
Sound program1
Sound program 2
Sound program 3
Speed of the automatic program
Microphone sensitivity
Silent mode refers to music-controlled operation. If the silent
mode is deactivated "OFF", the current program of the device
continues to run slowly if no further music signals (bass
impulses) are received. If the silent mode is activated "ON",
the light beams of the device switch off (BLACKOUT) if no
further music signals (bass impulses) are received.
IR remote control activated / deactivated
Select DMX channel mode and set DMX start address.
Master / slave operation. Define the device as a slave
Red Intensity 0% - 100%
Green Intensity 0% - 100%
Blue Intensity 0% - 100%
White Intensity 0% - 100%
Amber Intensity 0% - 100%
UV Intensity 0-100%
Red
Green
Blue
White
Amber
UV
Red+Green
Green+Blue
Blue+White
White+Amber
Amber + UV
Red+Blue+UV
Green+Amber
Red+Green+Blue
Red+Green+Blue+White
Master dimmer for static colours and internal programs
20