Troubleshooting Guide - Philips Cucina HR2860 Bedienungsanleitung

Troubleshooting guide

* If problems persist or if other problems occur, please contact Philips
Customer Service Hotline, Philips Offices or Philips Service Centre
for assistance.
Problem
The appliance does not
work
The knife unit / motor
unit is blocked.
The motor unit gives an
unpleasant smell during
the first few times of use.
The appliance makes a
lot of noise, smells, feels
hot to touch, smokes, etc.
The stopper of the
blender show leakage.
The mills shows a high
vibration, produces a lot
of noise or the knife unit
is out of alignment.
The mills leak
Solution
The appliance is provided with a safety system. If
accessories are not properly connected with the
motor unit, the appliance does not work. Check
whether the accessories have been connected in the
right way (see the various sections).Turn off the
appliance first!
Turn off the appliance and process a smaller quantity.
This is normal for the first few applications. If the
smelling continues, check the quantity you are
processing and the application time.
Make sure the lid attached properly.The stopper fits
with a "click". Check the quantity and reduce the
amount of ingredients if necessary.
Make sure the lid is attached properly.The stopper fits
with a 'click'. Check the quantity and reduce the
amounts of ingredients if necessary.
Check whether the knife is properly attached to the
beaker.Vibration can also be due to blockage of the
knife and too much ingredients. Clear the blockage or
reduce the processing quantity.
Unplug the appliance. Release the knife unit and
check whether the rubber ring is properly assembled
on the knife unit.
ENGLISH
17