Control Panel - Concept OV1000 Bedienungsanleitung

OPERATION MANUAL
• Use an AC outlet as indicated on the technical label on the appliance. If the appliance is connected to a wall socket
with higher voltages, it may cause a malfunction of the appliance and a subsequent fire or electric shock.
• Do not use the appliance if the power cord or plug is damaged or the socket is loose.
• Do not turn the appliance on when the water tank is full or the unit is upside down.

CONTROL PANEL

• On/Off: Plug the power cord into the appropriate electrical outlet.
• Press the on/off (POWER) button to turn the appliance on. Press the button again to turn the appliance off.
• Setting the speed of dehumidification: Press the speed setting button and select the option "L" for low speed or
"H" for higher speed. Low speed mode is suitable for dehumidifying areas with less humidity or for dehumidifying
during night time. The high speed mode is suitable for use in damp areas or for dehumidification during the day.
• Setting the timer: Press the timer button to set the time for the dehumidifier to turn off automatically. The device
can be set to turn offafter4, 8 or 12 hours ("4H" and "8H" shine simultaneously). Use the timer button to switch
between automatic shutdown mode and continuous mode (neither "4H" or "8H" shine).
WATER TANK IS FULL
Once the water tank is full, the dehumidifier stops operating
and the red indicator on the control panel lights up. If you
want the appliance to continue operating, remove the water
tank, drain it and place it back in the way shown in the figure
below.
Warning: Do not use or consume water from the tank, it may
contain harmful bacteria, fungi and other microorganisms.
0 OV1000
TIMER ON/OFF
EN
SPEED
35