Bluetooth Mode; Aux Mode - NGS SKY GAZER Bedienungsanleitung

ENGLISH

BLUETOOTH MODE

• Turn on the speaker and then switch to Bluetooth mode: a
beep will sound and the display will show BT intermittently.
Keep the speaker and Bluetooth enabled device within 10
meters or less of each other during paring process. Different
environments may affect the transmission distance.
• Set your mobile phone or the Bluetooth enabled device to
search for Bluetooth devices.
• When the Bluetooth enabled finds the speaker, select "NGS
SKYGAZER" from the list of found devices.
• If required, enter the password "0000". Select OK or YES to pair
the two units.
• After successfully being paired, BT will remain lit up on the
screen.
• Press and hold the button for 5 seconds to enter the
search mode.

AUX MODE

• Keep the unit powered on. Plug one end of the AUX cord to
the headphone jack on your device (phone, tablet, MP3, etc.).
• Plug the other end of the AUX cord into the AUX jack on the
speaker.
• Select the AUX playback mode with the SOURCE button.
• Use the connected device's audio controls for music playback.
USB PLAYBACK MODE
• Turn on the unit. Connect the USB device with MP3 music
to the USB port and select the USB playback mode with the
SOURCE button.
5