Schenck Process DISOMAT Opus Bedienhinweise Seite 63

English
b) You do not remember the memory number:
Acknowledge default value (memory no. 0)
System prompts for new input of vehicle number.
VehNo: 345 XYZ
(Max. 10 digits)
Acknowledge input.
ZEUS reports "Ready".
Contin: Weigh
Contin: Weight
But note:
•
If no first weighing has been performed yet, ZEUS returns to home position.
•
If material number has not been entered upon first weighing, you can do it
now (see First Weighing, Identify Load).
Insert weigh slip into printer and press key to acknowledge. First/second
weighing operation is complete.
Single Weighing
Follow these steps:
•
Insert new weigh slip into printer.
•
Identify vehicle.
•
Preset empty weight.
•
Release weighing operation.
•
Print weigh data.
If vehicle is unloaded, perform single weighing on incoming vehicle; if not, on outgoing
vehicle.
Home position, ZEUS display field
G 12.50 t
Follow these steps:
Press key F3 (perform single weighing)
®
DISOMAT Opus – Operating Instructions
© Schenck Process GmbH, Darmstadt
Scale Specific Control
0630 BV-H2322 AA
- 59 -