K.E.R.T COSMO 1500 Handbuch Seite 12

GB
Power supplies with
voltage and current
adjustment
ADJUSTMENT
Voltage mode
To set up the power supply as a generator of constant voltage, perform the following
operations.
a) Enable the output
(only for the COSMO series with LCD DISPLAY and SYSTEM DUALI)
b) Turn the current adjustment knob all the way to the right
c) Set the desired voltage value starting from the minimum value
d) Connect the charge to the terminals
Current mode
To set up the maximum deliverable current exiting from the power supply, follow these
instructions:
a) Enable the output (only for the COSMO series with LCD DISPLAY and SYSTEM DUALI)
b) Short-circuit the output terminals with a cable that supports at least the power supply's
rated current
c) urn the voltage adjustment knob all the way to the right
d) Set the current value starting from the minimum value
e) Remove the short-circuit cable
f) Connect the charge to the terminals
pag. 12