K.E.R.T COSMO 1500 Handbuch Seite 11

FRONT VIEW OF SYSTEM 300/2 - 150/2
1 - Main switch
3 - Mains pilot lamp
5 - Ground GND
16 - Air intake
17 - Power supply outlet
18 - Mains input fuse
19 - DIN/6 external control connector
20 - Switching for reading the master's voltage (left) and current (right)
21 - Master output enabled pilot lamp
22 - Master negative output terminal
23 - Master positive output terminal
24 - Master output enabling push button
25 - Slave output enabling push button
26 - Slave negative output terminal
27 - Salve positive output terminal
28 - Switching for reading the slave's voltage (left) and current (right)
29 - Enabling of tracking on (right)
30 - Slave output enabled pilot lamp
31 - Slave analogue V/A instrument
32 - Slave current adjustment
33 - Slave voltage adjustment
34 - Master voltage adjustment
35 - Master current adjustment
36 - Master analogue V/A instrument
Note: When the polarity protection intervenes (reversed polarity connection of the batte-
ries), the output disables. You have to turn it off at least 10 minutes to restore the
power supply with the charge disconnected.
35 34
36
21
3
20 24 25
1 22 23
pag. 11
33 32 31 19
16
27
26 28 30 5 29
GB
18
17