Herunterladen Diese Seite drucken

Espansione Pmb139-V; Pmb139-V Expansion - Paso PMB130B-V Gebrauchsanweisung

Konsole für notdurchsagen

Werbung

(1) Led indicatori di stato
• Local power: alimentazione locale in corrente continua.
• Remote power: presenza dell'alimentazione dal sistema PMS2000.
• System available: presenza della comunicazione tra la console ed il sistema PMS2000.
• Busy: indicazione di 'occupato': la console con più alta priorità sta occupando il sistema.
• Fault: indicazione di guasto in corso (il buzzer emette un suono intermittente).
(2) Chiave di sicurezza
• OFF: la console funziona come monitor degli allarmi, dei guasti e consente l'invio di semplici messaggi vocali.
• ON: la console è pronta per inviare messaggi d'emergenza pre-registrati di allerta/evacuazione od in viva voce.
• RESET ALARM: vengono fermati tutti i messaggi d'emergenza in corso.
Nota: la chiave è disinseribile dall'addetto alla sicurezza solo quando si trova in posizione OFF.
(1) Status indicator LEDs
• Local power: local DC power supply.
• Remote power: presence of power supply from the PMS2000 system.
• System available: presence of communications between the console and the PMS2000 system.
• Busy: the console with the highest priority has seized the system.
• Fault: indication of an existing fault (the buzzer sounds intermittently).
(2) Security key
• OFF: the console functions as a monitor of alarms and faults, and enables simple voice messages to be sent.
• ON: the console is ready to send pre-recorded or live emergency alerting and evacuating messages.
• RESET ALARM: all the current emergency messages are stopped.
Note: The key switch can be excluded by the safety manager only when it is in the OFF position.
1.2

Espansione PMB139-V

Pannello frontale
[19] Connettore per collegamento alla console PMB130B-V.
[20] Led rosso indicatore di messaggi viva voce o pre-registrati
di evacuazione od allerta in corso.
[21] Led verde indicatore di conferma selezione zona.
[22] Pulsante di selezione zona.
[23] Connettore per collegamento a modulo di espansione.
Nota: è possibile collegare alla console PMB130B-V un massimo
di 3 espansioni, per un totale di 36 zone controllabili.
4
Descrizione particolari
Descriptions of single items
1.2
22
21
20
1
7
2
8
3
9
19
4
10
5
11
6
12
Front panel
[19] Connector for connection to the PMB130V-V Console.
[20] Red LED indicating live or pre-recorded evacuation or
[21] Green LED indicating confirmation of zone selection.
[22] Zone-selection push button.
[23] Connector for connection to an expansion module.
Note: It is possible to connect a maximum of 3 expansion
modules to the PMB130B-V Console, enabling a total of 36 to
be controlled.
- PMS2000 System -

PMB139-V Expansion

23
alert messages in progress.

Werbung

loading

Diese Anleitung auch für:

Pmb139-v