Maintenance Advice - NORAUTO L11 Gebrauchsanleitung

velcro bands (27). Position the comfort pad so that it is level with your child's shoulder (28).
Returning to the original configuration of the car seat
Follow the instructions below if you wish to return to the harness configuration.
crotch strap, making sure that the metal keeper is correctly in place under the seat (29). Via
the front of the backrest, between the cover and the shell, grasp and twist the metal anchor
of one of the two upper sections of the harness, simultaneously pulling the section through
from the back (30). Thread the harness section through the side openings of the shell and
cover and re-install it via the front of the backrest at the desired height (31). Check that the
metal anchor of the harness section is correctly positioned behind the backrest (32). Repeat
the operation with the second harness section. Check the harness is not twisted.
Reclining your child seat
(33)
Storage of the instruction manual
(34)

Maintenance advice

All the material parts can be removed. Slight stains can be removed using a damp sponge
soaked in soapy water or it can be washed by hand at 30° in soapy water. Do not use bleach,
do not iron, do not machine wash, and do not tumble dry.
WARNING
• This car seat is a "Universal" child restraint system. It has been approved in accordance with
regulation N°44/04, and is suitable for general use in vehicles and is compatible with the ma-
jority (some exceptions) of vehicle seats.
• It is more likely that the seat is perfectly compatible if the vehicle manufacturer states that its
vehicles are suitable for taking "Universal" child restraint systems.
• This restraint system is classified as "Universal" in accordance with the strictest approval crite-
ria, whereas earlier models do not correspond to these new provisions.
• It can only be adapted to vehicles with 3-point safety belts that are either fixed or have a
roller mechanism and that have been approved compliant with the UN/ECE N° 16 or other
equivalent standards.
• If in doubt, contact the manufacturer or retailer of the restraint system.
40
EN - User guide
Re-install the