Spare parts and operating principle
Handle switch, LH
High Beam Switch
Position 1
Switch on the low beam, pressing the switch down to
activate the high beam as long as pressure is applied
The blue high beam LED is displayed on the speedometer
•
while pressure is applied
Position 2
Switch on the low beam, pressing the switch up to light the high beam permanently
The blue high beam LED is displayed on the speedometer
•
Indicator switch
Set indicator: Sliding the switch to the left
•
or right on the indicators.
Audible signal with sound.
•
Turn off indicator: briefly press white button.
•
Horn
Press the yellow button to sound the horn.
52