C-710Ls Output Card; Description; Program Channel Output; Priority Channel Output - Opvimus PM-712/0 Gebrauchsanweisung

E N G L I S H
C-710LS
Output Card

3. C-710LS OUTPUT CARD

3.1. DESCRIPTION

This card has one program and one priority output.
Both are of a 0 dB sensitivity and balanced by means of a transformer.
It receives both program and priority channel signals from the bus.
The card allows connection of the oscillator card, the C-710MA
microphone card and the vu-meter card for displaying program and
priority levels (see section 3.6).
In combination with the input card, it allows connection of several
PM-712/0 modules, keeping cascade priority (see PM-712/0, section
ENG
1.7). ENG
Figure 14
ESP

3.2. PROGRAM CHANNEL OUTPUT

A transformer-balanced output that provides the sum of all the signals from cards set up as program cards and
the program input of the C-710LE card, with a level of 0 dBu.

3.3. PRIORITY CHANNEL OUTPUT

A transformer-balanced output that provides the signal from the priority activated card, with a level of 0 dB.
If the priority of more than one input is activated, only the highest-priority input signal reaches the priority channel
output.

3.4. CONNECTION

The card uses 8-pin RJ45 connectors with metal housing.
Figure 15
20 PM-712/0