Pm-712/0 Modular Chassis; Description; Front View; Rear View - Opvimus PM-712/0 Gebrauchsanweisung

E N G L I S H

1. PM-712/0 MODULAR CHASSIS

1.1. DESCRIPTION

The PM-712/0 model is a modular frame that can house different card models (preamplifiers, microphone input
cards, fault detection cards, message recording-playback cards, etc.).
The default configuration consists of one input card (C-710LE), one output card (C-710LS) and a bus with 12 free
positions between both two cards.
The cards can occupy one or more positions, depending on the model:
2 positions: C-710PAL, C-710SAL, C-710RP1, C-710RP4...
1 position: C-710LS, C-710LE, C-710PPA...
It features a program channel, where the program signals are mixed, and a priority channel, with a cascading
priorities system.
ENG
ENG
The bus was designed so as to be divided into several sections. In this way, each section (consisting of one or
more slots per card, as required) works as an independent chassis.
ESP

1.2. FRONT VIEW

1. ON/OFF switch.
2. ON/OFF LED indicator.
3. Blank front plates
(card positions 1 to 12).

1.3. REAR VIEW

1. Power supply plate
(see figure 3).
2. C710LS output card
(see section 3).
3. C710LE input card
(see section 2).
4. Blank rear plates
(card positions 1 to 12).
14
PM-712/0
Figure 1
Figure 2
PM-712/0