STIEBEL ELTRON WPIC Bedienung Und Installation Seite 45

INsTALLATIoN
Specification
AA01 X2.15 Mixer, heating circuit (X2.15.1 mixer OPEN / X2.15.2 mixer
CLOSE)
AA06 XD27 Programming unit
BT01 Heat pump flow temperature sensor
K10 Motorised diverter valve relay
MA14 Pump motor
MA15 Diverter valve motor
XD01 Heat pump mains
XD03 Mains terminal
XD05 Heat pump bus cable connector
XD20 3-pole screw-type plug-in terminal strip
www.stiebel-eltron.com WPIC | 45