CoNTeNTs | sPeCIAL INforMATIoN
SPECIAL INFORMATION
OPERATION
1.
1.1
1.2
1.3
1.4
2.
Safety �������������������������������������������������������� 27
2.1
Intended use ����������������������������������������������������� 27
2.2
2.3
Test symbols ����������������������������������������������������� 28
3.
4.
5.
Safety �������������������������������������������������������� 28
5.1
5.2
6.
Appliance description ������������������������������������� 28
6.1
6.2
7.
Preparation ������������������������������������������������� 29
7.1
Wall outlet �������������������������������������������������������� 29
7.2
8.
9.
9.1
Preparation ������������������������������������������������������ 31
9.2
Installation ������������������������������������������������������� 32
9.3
9.4
9.5
Safety valve ������������������������������������������������������ 33
9.6
9.7
9.8
9.9
10.
WPL 18 cool | WPL 23 cool ��������������������������������� 37
10.1
Preparation ������������������������������������������������������ 37
10.2
Installation ������������������������������������������������������� 38
10.3
10.4
10.5
Safety valve ������������������������������������������������������ 39
10.6
10.7
10.8
10.9
11.
Specification ������������������������������������������������ 43
11.1
11.2
11.3
Data table �������������������������������������������������������� 46
ENVIRONMENT AND RECYCLING
26
| WPIC
sPeCIAL INforMATIoN
- The appliance may be used by children over 8
years of age and persons with reduced physical,
sensory or mental capabilities or a lack of ex-
perience and expertise, provided that they are
supervised or they have been instructed on how
to use the appliance safely and have understood
the potential risks. Children must never play with
the appliance. Cleaning and user maintenance
must not be carried out by children without
supervision.
- The connection to the power supply must be
in the form of a permanent connection. Ensure
the appliance can be separated from the power
supply by an isolator that disconnects all poles
with at least 3 mm contact separation. This re-
quirement can be met by using contactors, circuit
breakers, fuses/MCBs, etc.
- When adjusting the circulation pump, make sure
that the minimum flow rate is ensured at all op-
erating points.
www.stiebel-eltron.com