Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8 E
General information:
A = Motor operation limit switches
S1 and S2. Switches are
factory adjusted and should
not be manipulated.
B = Additional signal switches S3
and S4, for arbitrary usage.
Adjustable with 2 switch cams.
C = Feedback potentiometer.
Without EPOS as accessory
for
user.
With
integrated
element
resistance balance bridge.
D = Ground terminal (not for 24 V
version)
E = Electronic
(Plug-in
modulating control.
F = Terminal strip for connection
of motor and limit switches S1
and S2. On actuator versions
with EPOS, terminal strip for
line voltage and input signal
connection 0...+ 10 V (0...20
EPOS
an
mA).
of
G = Terminal
switches S3 and S4 and
feedback potentiometer.
K
positioner
EPOS
H = Cable adapter 20 as per EN
module)
for
I = Cable fitting 20 for additional
J = Adjustment transfer bolt to
K = Square
strip
for
signal
M = Switch S7 for line voltage
Aux. switches:
S3 = back - S4 = front
111 6041 050 E
50262.
cable adapter as per EN
50262.
feedback potentiometer and
signal switches.
shaft
for
operation crank
interruption
J
manual
Werbung
