Battery Mode; Technical Specifications; Charging The Battery - NGS WILDSKA ZERO Bedienungsanleitung

USER'S MANUAL

BATTERY MODE

1. Put the switch on the back to battery position.
2. Switch on the speaker by pressing the STANDBY button.

CHARGING THE BATTERY

1. Connect one end of the power cable to the speaker and the
other end to the electricity supply.
2. A red LED will appear on the screen while it is charging.
3. When the battery is fully charged the red LED will
disappear and a green LED will appear.
8

TECHNICAL SPECIFICATIONS

TWS
USB / SD / BT / AUX inputs
Microphone input
Guitar input
LED screen
LED lights
AUX output
Input voltage: AC 100V-240V 50/60Hz
Frequency range: 20Hz ~ 20kHz
WILDSKA1
Output power
(Peak power): 300W
Woofer size: 2 x 8"
Tweeter size: 2 x 3"
RMS power: 80W
Battery: 12V/4.5A
Battery life:
At 100% volume 3 hours
At 70% volume 7 hours
At 50% volume 12 hours
WILDSKA ZERO
120W
1 x 8"
2 x 3"
20W
12V/2A
4 hours
7 hours
12 hours