NGS WILDSKA ZERO Bedienungsanleitung Seite 7

ENGLISH
4. TWS
A. Change the two speaker in the BT mode, then press the
PLAY/PAUSE button on one speaker for 5 seconds.
B. You'll hear a beep and ON will appear on the main screen
and PAUSE on the secondary screen.
C. Search your mobile device for NGS WILDSKA and it will
hook up.
BUILT-IN RECORDING FUNCTION
1. Plug in a microphone to the MIC IN input
2. Insert USB/SD card into the corresponding port, press
MODE button and select USB/SD mode.
3. If the USB/SD card is plugged into the speaker for the first
time, the system will automatically create a folder named
RECORD to save recorded files (FAT32 USB file system is
supported).
4. When you are ready to record, press REC button to go to
recording mode. The current sound output will stop and
the MICRO mode will be activated, the screen shows the
recording time. The device starts recording when the
screen shows 00:01 and users can use the microphone to
record.
7