NGS WILDSKA ZERO Bedienungsanleitung Seite 6

USER'S MANUAL
AUX IN, USB/SD, BLUETOOTH
To switch from one mode to another press the MODE button.
If the device is not connected to a USB stick or an SD card,
these modes will be omitted.
1. AUX IN
With the attached audio cable, you can connect the device
with the external multimedia audio sources through the
port "AUX". After connection, just set the mode to AUX by
pressing the MODE button on the device. At this time, the
AUX indicator will be displayed on the screen, suggesting the
device can play the audio files from multimedia sources like
PC, mobile phone, MP3 and MP4, etc.
Note: In AUX IN mode, the forward and rewind song functions
will not operate. They must be accessed through the auxiliary
device directly.
6
2. USB/SD CARD PLAYING
Insert the SD card or a USB Flash memory stick into the
corresponding slot. The device will automatically play any
music in MP3 format on the card.
3. BLUETOOTH MODE
A. Press the MODE button until the word "BLUE" appears
on the screen. The icon will start to flash. In Bluetooth
mode the device goes into searching / paring / reconnect
mode for pair.
B. Now, turn ON the Bluetooth function on your mobile phone.
C. Search for "NGS WILDSKA" and select it to pair (for
first time pairing or pairing a new mobile device). Once
connected, the icon will stop flashing.
D. The Bluetooth speaker will be reconnecting automatically
if your mobile phone has been paired (Depend on the
of mobile phone's type and configuration, manual
reconnection may require on some devices).