Linde Safety Guard Originalbetriebsanleitung Seite 99

Sensors, switching output (middle)
The LEDs 1 to 4 indicate the status of the sen-
sors.
The following operating statuses are possible:
LED green:
●
The display unit is switching on. The sen-
sors perform self-testing for 10 seconds.
LED off:
●
The display unit is switched on. The sen-
sors are ready for operation.
LED red:
●
The display unit is switched on but the re-
spective sensor is not ready for operation.
Stop operation. Check the sensor.
The middle LED displays the status of the
switching output.
The following operating statuses are possible:
LED green:
●
Switching on or changing the switching out-
put from active to inactive.
LED off:
●
Switching output inactive.
LED red:
●
The switching output is active, e.g. speed
reduction is active.
Pairing active
The LED indicates whether a portable warning
unit is paired with the display unit. No warning
message is triggered for a paired portable
warning unit.
The following operating statuses are possible:
LED off:
●
No portable warning unit is paired.
LED green:
●
Mobile warning unit is paired and within
range of the display unit.
LED red:
●
Mobile warning unit is paired but not within
range of the display unit.
Operating Instructions - 3008011701 EN - 11/2019
Operating devices and display elements
Safety Guard display unit - Truck Unit

1 2

3
3 4
LSG_0023
LSG_0027
13